• Drag-in Pump Kit

  • JWL Cleaning Gun with 200MM Tube

  • Chemical Pressure Sprayer - 1LTR

  • 1.5L Universal Pressure Sprayer

  • 1.5L Foaming Pressure Sprayer

  • Aeropro Angle Die Grinder Kit (10 Piece Stones)

  • Flat Type Black Polypropylene Hydraulic Protective Hose Sleeve

    10mm-200mm

    Flat Type Black Polypropylene Hydraulic Protective Hose Sleeve

  • Flat Type Yellow Polypropylene Hydraulic Protective Hose Sleeve

    10mm - 60mm

    Flat Type Yellow Polypropylene Hydraulic Protective Hose Sleeve

  • Round Type Black Polyproplene Hydraulic Protective Hose Sleeve

    10mm - 60mm

    Round Type Black Polyproplene Hydraulic Protective Hose Sleeve

  • Tyre Valve Connector, Angled, Swivel Hose Tailpiece, Open End

  • Tyre Valve Connector, Straight, Swivel Hose Tailpiece, Open End

  • Tyre Valve Connector, Angled, Swivel, Female Thread Rp 1/4", Open End

  • Tyre Valve Connector, Straight, Swivel, Female Thread Rp 1/4", Open End

  • Tyre Valve Connector, Straight, Swivel, Hose Tailpiece, Closed End

  • Tyre Valve Connector, Angled, Swivel, Female Thread Rp 1/4, Closed End

  • Tyre Valve Connector, Straight, Swivel, Female Thread Rp 1/4, Closed End

Showing 16 of 171 products

Load more

Garage equipment for professional workshop use

Garage equipment is a broad category, but the common thread is compressed air and fluid handling — the two systems that run through most vehicle service bays. Tyre inflation, lubrication, wash-down, and air preparation all depend on getting the right pressure, the right flow, and the right connections in the right place.

The products here are stocked for professional and trade use. That means correct specifications, adequate pressure ratings, and fittings that match the BSP thread standard used across UK workshop equipment. Quick-release couplers, FRL units, hose assemblies, and inflation equipment are all available without minimum order quantities.

If you're setting up a new bay or replacing specific items in an existing system, the range covers the most common requirements. For anything non-standard or high-volume, contact our team — we've been supplying workshop and industrial customers since 1976 and can usually source what's needed.

Frequently Asked Questions

What counts as garage equipment?

Garage equipment covers the tools and systems used to maintain and service vehicles — tyre inflation, lubrication and fluid dispensing, air preparation units, wash-down equipment, and the quick-release couplers and hose assemblies that connect them. The range here covers the pneumatic and fluid-handling side of that.

Do you sell tyre inflators and pressure gauges?

Yes. The tyre inflation section includes handheld inflators, clip-on tyre gauges and inflation hoses in standard valve fittings. If you need something specific, contact our team.

What air pressure do garage tools typically need?

Most air tools and inflators run at between 6 and 8 bar (90-120 psi). FRL units and regulators let you set the working pressure downstream of your compressor — useful if different tools in the same bay need different pressures.

Can I order individual items without a minimum order?

Yes. There is no minimum order. Single items are fine.

Do you deliver garage equipment near me?

We deliver to England and Wales with free delivery on orders over £200. Single items and smaller orders are also welcome — delivery charges apply below the free delivery threshold.