A Jubilee clip’s lifespan depends on its material and environment, but all genuine clips meet BS 5315 and exceed required corrosion‑resistance levels. Mild steel versions achieve 72–240 hours of salt‑spray protection, while 304 and 316 stainless steel clips offer long‑term durability in marine, chemical and outdoor conditions.

Stainless steel Jubilee clips offer superior corrosion resistance and durability, making them the best choice for marine, chemical or outdoor applications. Mild steel versions are perfectly suitable for everyday, non‑corrosive environments.

Pressure capacity varies by size and band width. Smaller standard worm‑drive clips can withstand up to 203 psi (≈14 bar), while larger diameters typically handle around 102 psi (≈7 bar). Tightening torque ranges from 3.4–6.7 Nm, with maximum limits up to 9 Nm. However, high‑torque Jubilee clips exceed these figures.

Measure the outside diameter of the hose once fitted to the spigot. Choose a clip where your measurement sits comfortably within the stated size range. Learn more about Jubilee Clips in our article.

Jubilee clips can be used on low‑pressure fuel lines when correctly sized and fitted. The hose must be flexible enough for uniform compression, and the clip should sit within its mid‑range diameter for optimal sealing. For high‑pressure fuel injection systems, purpose‑designed clamps such as EFI clamps or O‑clips are preferred.

Jubilee clips are designed to compress flexible hoses onto rigid fittings. They are not intended to clamp directly onto solid pipework without a hose.

A flat‑blade screwdriver, nut spinner or Jubilee Flexidriver is typically used. The Flexidriver is especially useful for tight or awkward spaces.